Static mixers are also known as mixers in the industry. They have been widely used in industrial manufacturing and have been loved by many users. So let's take a look at the maintenance information and related precautions for static mixers. Learn more.

1. If the static mixer is not used for a long time, we need to turn off the static mixer and cut off the power supply, because the long-term connection of the power supply will cause the temperature of the body to overheat, causing damage to various electronic components inside the device. For the surface of high-speed extensions, we also need to clean them. In the key transmission parts of the equipment, we need to put on the lubricating oil to ensure the normal operation of the equipment in the future.

2. The V-belt of the static mixer should be kept the same size. When placing it inside the gearbox, you should pay attention to it, so as not to damage the V-belt, and you need to pay attention to tightening when installing the V-belt inside the equipment to avoid the belt falling off. After tightening the nut, we should put a nut on the nut to prevent the nut from falling off due to various factors.

3. The oil type of the static mixer should be No. 46 gasoline, because the equipment needs more power when it is running, and the heating value of No. 46 gasoline is high, which can meet the requirements of the static mixer for gasoline.

In addition, we should clean the fuel tank of the mixer every half year to ensure that there will not be too much oil in the fuel tank. The filter of the mixer should be cleaned every other month, because the filter is easy to intercept debris. It causes accumulation of debris, but the specific cleaning time should be selected according to the strength of the mixer. When the strength is high, we can shorten the tank cleaning cycle.

4. When the static mixer is audible during operation, we should shut down the equipment and stop the operation of the mixer. Please consult the professional maintenance personnel to check the equipment failure. Only after the equipment failure is eliminated, the static mixer can be used again. The equipment causes more serious damage and even poses a threat to the safety of the operator.

5. If the static mixer trips during the use of the thermal relay causing the device to stop running, we should wait for the body temperature to cool down and then press the reset button on the thermal relay to restart the mixer.

The relevant precautions and maintenance information about the static mixer will be introduced to you here. I hope that this content will give you a more comprehensive understanding of the static mixer. More about the contents of the mixer, you can log in to our official website to do a more comprehensive understanding.